Your cart is currently empty |
Subtotal: | $0.00 |
Movable mount for speech devices, trays, cameras, and more!
Easy and intuitive to use--just move it!
3 movable joints (shoulder, elbow, wrist)
Joint resistance: Joints can be adjusted from low to high resistance, making it easier or harder to move
Built in features and plates on many speech devices
Mount'n Mover trays and device plates using Quick Connect Plate
Adjust tilt from 0-180 degrees
Tilt hinge on Quick Connect Receiver is available with either low or high resistance
Same reach
Lower price
Sleek design, without hoop and paddle
Easier to use out of the box
Tilt and arm joints do not lock
Same load capacity: 15 pounds
Keep in mind that the tilt angle does not lock
You may not want to use the Easy Mover for a heavy device if:
the person has a heavy device and uses their device with their wheelchair tilted; or
the person uses an eye gaze device, the device tilts downward, and they drive in this position
Attach the wheelchair hardware
Insert the post
Attach the Easy Mover's Link cube to the post
Move the Easy Mover
Use the 3/16" hex key with the ball joint
Experiment with tightening or loosening the joints
Have the person try it out--can they move it? do you want them to move it?
Adjust it so it works for the person
Choose a High or Low resistance hinge at the time of order
The Tilt cannot be locked in place
If the person is going to tilt in their wheelchair while using the device, you may need to increase the joint resistance
Height: 6.5 inches (163.9mm)
Width: 3 inches (76.2 mm)
Length: 21.0 inches (532.2mm)
Weight: 2 pounds 15 oz.
Engineering Plastics (same as Gen 2 Mount'n Mover)
Aircraft Aluminum
Steel
Dual Arm Easy Mover
Quick Connect Receiver (attached)
3/16" T-handle Hex Key with ball end
Materials
Easy Mover Instructions
Mount'n Mover Quick Guide (for wheelchair attachment reference)
Warranty registration card
Hinge Torque: High or Low
SKU: EM2-QC-H - High Hinge Torque
SKU: EM2-QC-L - Low Hinge Torque
Please fill out the form below to request a product quote. A representative will respond to you via email or phone as soon as possible.