|Your cart is currently empty|
|ADD: KEYBOARD TABLE:||YES (Add $378.00)|
|ADD: ELBOW HANDREST:||YES (Add $124.60)|
|ADD: LAPTOP HOLDER:||YES (Add $161.00)|
|ADD: CROSSBAR Ø4CM:||YES (Add $126.00)|
|ADD: SIDE TABLE - SMALL:||YES (Add $161.00)|
|ADD: PIVOT MONITOR HOLDER (VESA 10X10):||YES (Add $155.40)|
|ADD: VESA 20X20 ADAPTOR:||YES (Add $70.00)|
|ADD: VARIABLE SCREEN DISTANCE MOUNT:||YES (Add $161.00)|
|ADD: FLIGHT STICK BASE:||YES (Add $116.20)|
|ADD: SIDE TABLE - LARGE:||YES (Add $308.00)|
|ADD: SCREEN DISTANCE EXTENDER:||YES (Add $161.00)|
|ADD: STANDARD MONITOR HOLDER (VESA 10X10):||YES (Add $85.40)|
LEVUS Regular Zero Gravity Workstation
BUILD YOUR OWN WORKSTATION: start with the core frame and add all other components as necessary
LEVUS CORE FRAME is the most basic and minimal set-up needed for comfortable work with a single monitor mounted centrally on a crossbar. Pick all other ADD-ONs from the list of suggestions below. Levus Workstation follows an open architecture where you can freely add and replace components depending on your requirements.
WIDTH: 125cm - 4.1ft
LENGTH: 210cm - 6.9ft
CORE FRAME: aluminium pipe segments, with pipe connectors and a base foot with 4 workmode angles
LOUNGE SEAT: hand-crafted custom design with hard foam core and heavy duty faux-leather material. wooden suspension slats with adjustable lumbar support. Seat length: 214cm, Width: 80cm
HEADREST: hard foam core and durable faux-leather material. Adjustable height position
1 x STANDARD MONITOR MOUNT ON A CROSSBAR: moves along and around the crossbar - suitable to mount a single monitor on a VESA plate with 100x100mm hole pattern
75cm x 50cm spacious table with a cutaway for optimal positioning so that your forearm can rest comfortably on the table surface during work. Sturdy mounting system prevents shake during typing. The table can be flipped up to get in and out of the workstation. It would be also possible to attach it reverted if you prefer to have the straight edge rather than the cutaway. Height / distance to your hips and distance to your belly are adjustable - the table can be mounted depending on your physical parameters.
The table comes with all the pipes and hinges necessary for a mount on the LEVUS core structure.
Makes it possible for your elbow not to hang in the air during typing and easier for you to reach the keyboard. Flippable for a different angle and suitable for both hands.
A compact add-on for keeping your laptop always on hand. The laptop holder is best mounted on the Levus core structure / side-pipe and placed over the mouse table, thus keeping the table clutter free, as well as securing your laptop from coffee-spills.
Mounted alongside your main monitor, laptop can be used as an auxiliary monitor to see the content of your own webcam or have your zoom/teams colleagues displayed there while you're presenting content on your main screen.
The pipe comes along with 2 compatible pipe mounts and can be fixed at any point inbetween of the bearing pipes of the core structure. The pipe is intended to hold monitor mounts if several monitors are to be placed. Can be used it for pull-ups and stretch exercises without leaving your working position :)
SIDE TABLE - SMALL
For the minimalists among you - a compact side table 50cm x 29cm (19.6" x 11.4") which can be mounted on either side of the Levus Core Frame. Smooth surface is ideal for the mouse and gives minimal friction to your arm/wrist during mouse movement. There are no pre-drilled holes in the table plate - just find a position which is optimal to you and drive in the screws to attach the table to the metal bracket. Pivot brackets in the table mount allow for quick angle adjustment. If needed, the table can be "flipped up", so you an enter/exit the workstation from the table side.
PIVOT MONITOR HOLDER (VESA 10X10)
Multi-directional pivot to turn/tilt the monitor towards you if mounted on the side. To be used if several monitors are being positioned on the crossbar or core frame. The product consists of a pipe-holder/mount, pivoting brackets, 10x10 VESA Plate and all the neccessary nuts & bolts.
VESA 20X20 ADAPTOR
VESA Plate with 10x10, 20x20 hole patterns. Compatible with LEVUS Pipe-holders and pivoting/rotational brackets. To be used with large monitors that have 20cm x 20cm or 10cm x 20cm mounting hole patterns.
Note: this extension contains only the VESA Plate and not the pivoting brackets and pipe holders - those are part of the Monitor Holder set
VARIABLE SCREEN DISTANCE MOUNT
If the standard eye-to-monitor distance with the latter being mounted on a core frame crossbar (80cm - 32") is not comfortable for you, use the variable screen distance plug-in to move your screen(s) closer to your face. Now can place your monitor in a any position between your nose and the core frame. You could even place 2 monitors on the Plug-In's extender pipe if needed.
FLIGHT STICK BASE
For the pilots among you - a flightstick base (15cm x 30cm) which can be mounted on either side of the Core Frame. Pivoting brackets make it possible to flip the flightstick down to enter / exit the gamestation. You can also loosen the pipe mount and slide the entire flightstick base all the way down to the floor if not needed for a longer period of time.
There are no pre-drilled holes in the wood plate as we don't know what flightstick you'll be using. Depending on the mounting hole pattern of your flightstick - drill holes in the wooden base and attach your flightstick with appropriate bolts - then attach the wood base to the mounting bracket.
SIDE TABLE - LARGE
For the maximalists among you - a large side table 125cm x 41cm (49.2" x 16.1") which can be mounted on either side of the Levus Core Frame. Smooth surface is ideal for the mouse and gives minimal friction to your arm/wrist during mouse movement. Outside of the mouse-area you have plenty of space to store your phone, coffee, tea, notebooks, etc. There are no pre-drilled holes in the table plate - just find a position which is optimal to you and drive in the screws to attach the table to the metal brackets
SCREEN DISTANCE EXTENDER
Groundbreaking and surprisingly comfortable set-up: you XXL Screen (up to 55") is placed at distance, creating a home-cinema experience for computer work. Scale up the resolution a bit to see the small details. Positioning your screen at an extended distance to your eyes (130cm) is more healthy and natural for your iris, especially when spending long hours staring at the screen.
STANDARD MONITOR HOLDER (VESA 10X10)
1D-directional pivot to turn/tilt the monitor around the crossbar it is mounted on. The product consists of a pipe-holder/mount, 10x10 VESA Plate with complimentary nuts & bolts.
Special Order: Non-Cancellable/Non-Returnable/Non-Refundable. Sale is final.
Please fill out the form below to request a product quote. A representative will respond to you via email or phone as soon as possible.