|Your cart is currently empty|
The all new dual stage S2S v3 Standing Desk adjustable height tables combine unique, sustainable materials with expert design for a state-of-the-art column and drive sysytem. Our anodized aluminum column design features a durable four-piece construction using US military-vehicle adhesives to create rich, clean lines without holes, crimps, or weld splatter.
The S2S v3 adjustable height desk features a very quiet, compact, in-line motor/drive system that fits inside a 43-millimeter diameter column. With minimal clearance required for the shroud to wrap, our standard customs can provide elegant and slender appearance under the work structure.
S2S v3 feet and frames come in various configurations and designs to suit your needs. Feet are available in multiple lengths to accommodate work surfaces of varying sizes. Available in both black and silver powder-coat colors, S2S v3 feet are made of 7-gauge steel with 5/16”-18” threaded holes for attaching glides. Custom designs and colors are also available.
Two applications are available for mounting the feet to the leg columns: Standard and Dive. With a standard mount application, the leg column sits on top of the foot while the dive mount option is used when lower start heights are required due to ANSI-HFES.
Frames are available to support one, two and three leg table applications. Standard two-leg table configurations utilize a simple top plate stretcher bar assembly, to minimize profile depth and maximize knee clearance below the work surface.
Consider the following:
60" to 62" work-surface - 56" crossbar
72" to 74" work-surface - 68" crossbar
For oversized table applications, two bar frame assembly is available if additional stability is required.
Feet & frames can both be customized to fit your work-surface needs.
Three-leg configurations do not stretcher bars and come standard with top plates only.
Single and dual-stage electric actuation is available to meet a variety of adjustament ranges. S2S v3 electric adjustable height systems feature a software-based electronic protection system (ISP-Intelligent System Protection) to reduce the risk of obstacles being trapped or crushed.
An optional actuator-integrated, sensor-based ISP is also available to provide a higher level of sensitivity for collision prevention.
Column Dimensions: 2.6" x 4.9"
Speed: 1.5" per sec.
Install height: 22.5" - 48.5" Standard Mount
Install height: 21.2" x 47.2" Drive Mount
Glide Adjustment: 0.5"
Noise level: >49 dB
Color: Black or Silver Anodized
Load capacity: 176 lbs. per leg (dynamic)
Load capacity: 292 lbs. leg (static)
Duty cycle: 2 min. on/18 min. off
Anto-collision control: IPS (Intelligent System Protection)
Hand Controls: Simple Switch (up/down)
Hand Controls: Optional display handset w/ memory
**All S2S v3 systems have been tested and exceed BIFMA requirements**
With a wide array of state-of-the-art controls, our S2S v3 adjustable height table systems are incredibly easy to operate. Our control boxes and programmable handsets offer easy motility, quick installation, and safety features that reduce the risk of fingers getting trapped or crushed. Customize your S2S v3 system by choosing between a variety of control options.
Control Box comes standard with all S2S V3 Desks
S2S v3 Standing Desk warrants that our line meets or exceeds standard BIFMA testing criteria and will be free from defects in materials and workmanship for the following product categories:
Electrical & Mechanical Components: 2 years
Structural & Design Components: 3 years