Conform Triple Static Arm

Conform Triple Static Arm

Conform Triple Static Monitor Arm is designed to provide side-by-side support for three monitors, in a compact footprint. As part of the Conform family it uses the Workrite pin assembly system, allowing it to be quickly mounted to a variety of bases and reconfigured with additional Conform monitor arms to adapt to your changing needs.

Easily create a six monitor array by using a 28” pole mount and two Conform Triple Static Monitor Arms. The Conform Triple Static Monitor Arm has been engineered to support over 15,000 cycles and exceeds ANSI/BIFMA x5.5 requirements. TAA Compliant.

Conform Features

Supports: three monitors 0–16 lb. each
Maximum monitor height: Pole dependent
Articulation range: 0″ (static arm)
Forward reach: 6.5″ with 24″ wide monitor*
Stowed depth: 6.5″
Monitor Tilt: +90°/-45° Pivot: +/-90° Rotation: +/-90°
VESA:  75 mm & 100 mm
Color: silver
Warranty: 10 year

Documentation

Conform Monitor Arm Series Brochure

Triple Static Monitor Arm Installation Instructions

Pricing and Specifications Guide (USA)

Monitor Mount Comparison Guide

Monitor Mount Application Considerations

Conform Base Options

C-Clamp & Grommet Base

For use with Articulating Monitor Arms
Convenient top adjusting C-clamp design
Includes both c-clamp & grommet mounting options
180° pivot limiter on lower arm for space constrained environments
Supports up to 48 lb.
C-Clamp & Grommet Base Instructions

Conform Two Piece C-Clamp & Grommet Base

For use with Articulating Monitor Arms
Detachable two piece c-clamp design for panel mounted desks
Includes both c-clamp & grommet mounting options
180° pivot limiter on lower arm for space constrained environments
Supports up to 48 lb.
Conform Two Piece C-Clamp & Grommet Base Instructions

Tool Bar & Slatwall Base

For use with Articulating or Static Monitor Arms
Easily mount to Tool Bars, Privacy Panels & Slatwalls
Clamping design supports slat rails up to 1.25″ wide
Supports up to 48 lb.
Tool Bar & Slatwall Base Instructions

Wall Plate Base

For use with Articulating or Static Monitor Arms
Wall mount to concrete, steel or drywall*
Supports up to 48 lb.
Wall Plate Base Instructions
*Mounting hardware not included; drywall installation requires screw to stud contact

14″ Pole Base with C-Clamp & Grommet

For use with Static Monitor Arms; or Articulating Arms w/ Pole Mount Adapter
Includes both c-clamp & grommet mounting options
Convenient top adjustment C-clamp design
Supports 1–3 monitors, up to 48 lb.

14″ Pole with C-Clamp & Grommet Base Instructions

28″ Pole Base with Heavy Duty C-Clamp & Grommet

Designed for stacked monitor applications
For use with Static Monitor Arms; or Articulating Arms w/ Pole Mount Adapter
Includes both c-clamp & grommet mounting options
Heavy duty C-clamp design
Supports 1–6 monitors, up to 96 lb.
28″ Pole with Heavy Duty C-Clamp & Grommet Base Instructions

Adapter Options

Knoll® Antenna® Adaptor

For use with Articulating or Static Monitor Arms
Compatible with Knoll Antenna- Table Center Beam Center Mount & Antenna Table Center Beam Side Mount
Supports up to 48 lb.*
Knoll® Antenna® Adaptor Instructions
* Knoll Antenna capacity dependent

Dual Arm Adaptor

For use with Articulating or Static Monitor Arms
Converts single arm base options into dual arm base
Supports up to 48 lb.
Dual Arm Adaptor Instructions

Dual Pole Mount Adapter

For use with Articulating or Static Monitor Arms
Mount 2 Articulating Arms or Static Arms to a pole mount
Supports up to 48 lb.
Dual Pole Mount Adaptor Instructions

Dual Pole Mount Adapter

For use with Articulating or Static Monitor Arms
Mount 2 Articulating Arms or Static Arms to a pole mount
Supports up to 48 lb.
Dual Pole Mount Adaptor Instructions

K-Rail® Adapter

For use with Articulating or Static Monitor Arms with 80/20 T-Slot construction materials
Quick release lever for easy vertical adjustment
Supports up to 48lb”.
K-Rail capacity dependent
K-Rail® Adaptor Instructions

Accessory Options

Flat, Static Extension Arm

For use with Articulating or Static Monitor Arms
Extends forward reach by 10.5″
Flat, Static Extension Arm Instructions

Quick Release Adaptor

Simplify monitor installation with a Quick Release Adaptor
Fits Standard VESA mounting patterns (75 mm & 100 mm)
One adaptor per monitor
Dimensions 4.5″ W × 4.5″ H × .5″ D

Laptop Holder

Accommodates most 13″ to 15″ laptops, up to 10lbs
Supports laptops up to 10 lb
Use with single or dual monitor arms
Depth adjusts from 9.2″ to 11.7″ allowing use of docking stations
Laptop held in place by formed front edge
Anti-vibration pads provide secure foundation and minimize laptop vibration
Vent design for optimal cooling
Silver finish, steel construction
Laptop Holder Instructions

Twin Monitor Bracket

For use with Articulating Monitor Arms Only
Converts single monitor arm into a dual monitor arm*
Recommended for use with Heavy Duty Articulating Arm
Maximum compatible monitor widths 24.5″
Available in black
*Reduces Maximum Weight Capacity of Arm by 5 lb

Please fill out the form below to request a product quote. A representative will respond to you via email or phone as soon as possible.