|Your cart is currently empty|
FLEX-WELDING Ergo Stool
The welding flex is an ergonomic stool that reduces pressure to the lower limb. This product allows for multiple work position since the angle of the backrest can change between a low chair or a work bench. Also, its fireproof material is ideal for welding work.
Backrest: Fully Upholstered Ergonomic Backrest 12”w x 15.5”h
Seat: High Resilience Velva Foam
Seat dimensions: 18”w x 15”d
Control: Seat/Backrest Height Adjustment
Control: Seat/Backrest Angle Adjustment
Seat height adjustment: 140 mm pneumatic lift (16”-21”)
Base: Steel base (21” x 27”)
Base: 3” casters (5 un.), elastic rubber
Shipping weight: 33 pounds
Casters and Glides: 2 - 3” Casters
Casters and Glides: 3 - 3” Casters With Brakes
Casters and Glides: 2 1/4” Nylon Glides
Cover: Suede / Welding Grade (Black)
Tool tray: Tool Tray (Small)
Tool tray: Tool Tray (Large)
80 mm Pneumatic Lift (13”-16”)* [080mm]
100 mm Pneumatic Lift (14,5”-18”)* [100mm]
200 mm Pneumatic Lift (17.5”-25.5”)* [200mm]
* Seat height of product may vary depending on parts and accessories included.
LIMITED LIFETIME WARRANTY – ERGONOMIC PRODUCTS
Synetik design guarantees all of their products against manufacturing defects for a period of ten (10) years from the date of purchase. Stools frames pneumatic cylinders and all fixed parts on our stools are guaranteed for life. Any moving mechanical parts are covered for ten (10) years. This guarantee does not apply to products requiring replacement due to normal wear, negligence, obvious abuse, or any damage caused in transport or due to misuse of the product as per included instructions and warnings. Synetik design offers no other guarantee against wear other than for the applications specified within this document. Synetik design will not be held responsible at any time for any damages and/or interest, direct or indirect losses, incidental, consequential, repeated and/or exemplary losses or damages. This Warranty applies to normal use, meaning a standard eight (8) hour day, and for a maximum user weight of 350lbs.
During the warranty period, Synetik design will repair or replace any product covered by the warranty, if found to be defective or not in accordance with production standards. All warranty must be made at the point of sale.
LIMITS OF THE WARRANTY
All defective merchandise must be made available to a Synetik representative for complete inspection. This warranty applies exclusively to the terms and conditions as listed herein, and to the original purchaser only. The original purchaser is deemed to be the individual who purchased a new product from Synetik design or from an authorized distributor or reseller, for their own personal use.
Please fill out the form below to request a product quote. A representative will respond to you via email or phone as soon as possible.