DIGI-WAVE Personal Communication System 3 - DWS-PCS-3

One-way, digital technology that makes it easier to hear in everyday situations by reducing background noise and compensating for poor room acoustics or distance from the sound source. Beneficial for an array of personal listening scenarios—from conversations around the coffee table to hearing every word of your favorite TV program. Simply place the DLT 100 2.0 near the sound source.

System includes

(1) DLT 100 2.0 Transceiver*
(1) DLR 60N 2.0 Receiver
(1) MIC 090 Lapel Microphone
(1) EAR 041 Earphone
(1) CCS 044 Silicone Skin
(1) CCS 060 Silicone Skin
(1) CHG 102 Dual-Bay Charger
(1) BAT 022-2 AAA Rechargeable Batteries
(1) CCS 043 system carry case

*Each DLT-100 2.0 is packaged with an individual charger.

Features

Crystal-clear audio
Multiple channels available
Patented, interference-reduction technology provides seamless, secure operation
2.4 GHz operation works well in RF-saturated environments
Range of up to 100 feet outdoors/200 feet indoors (depending on environmental conditions).
Legal for use in most countries
2-year-warranty

Specifications: chg 102

Power input 110—240V AC @ 50-60 Hz
Power output 5 volts DC @ 1.2 amps
Cable length 6’ (1.8 meters)
Warranty 90 days

Specifications: dlr 60 2.0 architectural and engineering

The receiver shall be a digital receiver operating on the 2.4GHz ISM band utilizing GFSK modulation.It shall have the ability to communicate with the DLT 100 transceiver. It shall be housed in plastic enclosure 2.36” W x 3.54” H x 0.63” D (60 x 90 x 16mm) and have an LCD on the front panel. It will have a 30-pin connector supporting audio output and charging capability. It shall support recharging of NiMH batteries when used with Williams Sound compatible chargers or docking station. The receiver shall have a battery life up to 24 hrs with two AAA Alkaline batteries, and up to 20hrs with two NiMH batteries. Power will automatically shut off after approximately one minute when not operating with other compatible devices. The receiver shall have a range of up to 200 ft indoors and up to 100 ft outdoors. The receiver shall have 3.5mm mono/stereo headphone jack with all controls on the front of the unit. The receiver shall operate 15 simultaneous channels and shall have a 65 dB (A weighted) S/N ratio with a frequency response 150 Hz to 11 kHz.

The receiver shall have FCC, CE, C-tick and Industrie Canada approvals and be RoHS and WEEE compliant. The receiver shall have a two year parts and labor warranty (90 days on headphones and earphones).

This receiver shall be the Williams Sound model DLR 60.

Specifications: dlr 60 2.0

Dimensions: 2.36” W x 3.54” H x 0.63” D (60 mm x 90 mm x 16 mm)
Weight: 1.7 oz. (47g) without batteries.
Frequency Band: 2.4 GHz (ISM band)
Modulation: GFSK digital transmission
Range: Up to 100 ft outside, Up to 200 ft inside
Multi Channel: Up to 15 simultaneous channels (one way mode)
Case Material: Black ABS Plastic
Battery Life: Alkaline Disposable (BAT 010-2): Up to 27 hrs; NiMH Rechargeable (BAT 022-2): Up to 21 hrs
Battery Type: 2 x AAA Alkaline or NiMH
Power Save: Auto Sleep Mode after 5 min of no RF signal
Frequency Response: 150 Hz – 11 kHz
S/N Ratio: 65 dB (A weighted)
THD: 0.45%
Antenna: Internal
Output:
  60 mW
  3.5 mm stereo jack with mono output for Headphones/Earphones
  Back Speaker (muted when headphone jack in use)
Controls: Power, Volume +/-, Channel +/-, Setup, Battery Type
Display: LCD shows status: Battery Level, RSSI, Group/Channel#
Indicators: Red LED - blinks when charging; Green LED - stays on when charged
Docking Connector: 30-pin iPod Style for charging and audio out
Compatible Transmitter: DLT 100
Temp. Range: 32° – 122°F (0° to 50°C)
Chargers: CHG 102, CHG 1012, Digi-Dock
Accessories: Silicone Skin, Lanyard, Wrist Strap
Approvals: FCC, Industrie Canada, RoHS, CE, WEEE, C-tick
Warranty: 2 years, parts & labor

Specifications: dlt 100 2.0 architectural and engineering

The transceiver shall be a digital transceiver operating on the 2.4GHz ISM band utilizing GFSK modulation with patented frequency-hopping software to reduce interference potential. It shall be housed in plastic enclosure, have an internal rechargeable Lithium Polymer battery with smart charge built into the transceiver and an LCD on the front panel displaying signal strength, battery level, mode and time. It shall have a built-in microphone and speaker for users opting not to use a headset.The transceiver shall have a battery life up to 14 hrs per charge and take approximately 5 hrs to reach full charge. Power will automatically shut off after approximately one minute when not operating with other compatible devices.The transceiver shall operate in one-way or two-way mode (two speakers in a group at any given time) and have a range of up to 200ft in two-way mode indoors and up to 100ft outdoors.The transceiver shall have power, vol +, vol -, talk, CH +, CH -, ^, GRP, v, buttons.The transceiver shall have an illuminated talk button.The transceiver shall have a menu setup mode via front panel buttons configurable for (1 or 2-way operation), (master or slave operation) and (floor and 14+ language portable interpretation where common floor language is used).The transceiver shall have 3.5mm mono/stereo microphone and headphone jacks, all controls are on the front of the unit and a multi-pin style jack on the bottom provides battery charging access. USB charger compatible with iPod® chargers.The transceiver shall operate 15 simultaneous channels in interpretation mode and 4 simultaneous groups in two-way mode. It shall have a repeater mode to increase the range of the system.The transceiver shall have a 69dB (A weighted) S/N ratio with a frequency response of 150Hz to 11kHz.The transceiver shall have FCC, Industrie Canada, C tick and CE approvals and be RoHS and WEEE compliant.The transceiver shall have a two year parts and labor warranty (90 days on headphones, battery, charger and earphones).This transceiver shall be the Williams Sound model DLT 100 2.0.

Specifications: dlt 100 2.0

Dimensions: 103 x 62 x 11mm (4.1 x 2.4 x 0.4 inches)
Weight: 80g (2.8oz) including battery
Color: Black and silver
Enclosure: Shatter resistant PC/ABS plastic
Battery type: Li Polymer with smart charge built into transceiver
Battery life: Up to 14hrs talk time per charge
Charge time: 5hrs. TFP 045 with cable and international adapters; Optional two-bay charger CHG 102
Channels: Up to 15 simultaneous channels (Interpretation mode); Up to 4 simultaneous groups (2 way mode)
Operating frequencies: 2.4GHz (ISM band) 2.402 – 2.476GHz FHSS
Frequency response: 150 – 11KHz
S/N ratio: 69dB (A weighted)
THD: 0.33 %
Microphone input: Internal microphone (disabled when MIC jack engaged) and 3.5mm stereo jack; (tip/sleeve) with electret microphone bias, adjustable gain with 63dB range.
Audio output: Max SSPL 90 111.8dB (EAR 013), 116.8dB (EAR 041): Internal speaker (disabled when ear jack engaged): 16mW @ 33Ω
Range: Up to 100ft outdoors and 200ft indoors*
Modulation: GFSK, binary CDMA
RF output: 14dBm Max
Security code: 87 bit encryption
Controls: Front push buttons for volume up/down, quick group select, menu access and selection, MIC on/off, power on/off, tone control, side-tone adjustment, SLOC access and Secure Key access. System reset button (rear of unit).
Output: 3.5mm stereo/mono jack 30 pin charging jack
Side tone: Adjustable: Off (0dB), -6dB, -12dB below volume
Speaker: Internal speaker (disabled when ear jack is engaged)
Indicators: LCD (Group, channel, volume level, battery status, mode, signal strength)
LED’s: (charge status, voting) Red LED around talk button when enabled. Amber LED signifying voting feature activated.
Maximum presenters: Two presenters at any given time
Approvals: FCC, Industrie Canada, CE, C-tick, RoHS, WEEE
Warranty: 2 years parts and labor (90 days on accessories)

Specifications: ear 041

Style: Single, in-ear, isolation earphone
Plug: 3.5mm mono
Cord: 39”
Driver Size: 10 mm
Nominal Impedance: 16Ω
Freq. Response: 20 - 20kHz
Weight: 6g
Max Power Input: 5 mW
Sensitivity: 104 dB @ 1kHz
Replacement Silicone Tip: EAR 043 (0ne pair)

Specifications: mic 090

Color: Black
Weight: 15 g (0.5 oz)
Plug: 3.5mm mono
Cord: 39"
Phantom Powered: No
Nominal Impedance: 1500Ω @ 1kHz
Operating Voltage: 1.5 - 10VDC
Freq. Response: 20 - 18kHz
Pick-Up Pattern: Omni-direct
Transducer Type: Back electret
Max Input Sound Level: 110dB SPL
Sensitivity: -56dB ± 3dB
Replacement Windscreen: WND 090
Replacement Lapel Clip: CLP 090
Warranty: 90 days

Specifications: dws pcs 3 architectural and engineering: See specifications for: DLT 100 2.0 and DLR 60 2.0

Specifications: dws pcs 3: See specifications for: DLT 100 2.0 and DLR 60 2.0

Specifications: at 022-2: NiMH, 1.2 Volt, 950 mAh

SKU: DWS-PCS-3
MPN: DWS PCS 3

Special Order: This is not a stock item and is ordered specifically. Unfortunately, no returns, no cancellation, so please call our trained staff with any questions you may have prior to ordering to ensure you make a well informed, educated purchase.

Please fill out the form below to request a product quote. A representative will respond to you via email or phone as soon as possible.