|Your cart is currently empty|
Easy to Use
Extra Large 3/4" Buttons
Easy to Read characters
Easy to program
Replaces up to 4 standard remote controls
Use with any combination of TV's, VCR's, Cable boxes and satellites
Virtually impossible to misplace or lose
Easy to Read!
With Tek Partner, there’s no need to get your reading glasses out to find the button you’re looking for. The Tek Partner Universal Remote Control has huge brightly lit buttons with big readable characters.
Operate your home entertainment devices from one large, lighted button universal remote control.
Controls TV, VCR, DVD, Cable, and Satellite devices.
Tek Partner’s award-winning curved design allows the remote to sit securely on the arm of a chair or sofa. We’ve all searched the cushions for a wayward remote. Measuring 8.5 inches long and 5.5 inches wide, the extra-large Tek Partner is too large to lose in the furniture.
Operating System: Pre-Programmed Infrared Remote Control System.
Compatibility: Replaces most brands of infrared remote controls for TV, VCR, Cable and Satellites.
Power: 4 AA alkaline batteries (not included)
Battery Life: One year under normal operation.
Effective Range: 7.6m(25ft.),+/- 25 deg.
139mm(5 1/2”) width
215mm(8 1/2”) length
63mm(2 1/2”) height
Weight: 12 oz. (without batteries)
Keypad: Durable Conductive Rubber.
Button Size: 19mm(3/4”) square
Light Source: High Intensity Light Emitting Diode.
Molded Case: High Impact ABS Plastic
Warranty: 90 days (except misuse)
The buttons on the Tek Partner remote control are ¾ of an inch – about the size of a nickel.
The Tek Partner remote is compatible with TV, DVD, VCR, Cable boxes and Satellite receivers.
No, the Tek Partner remote is not designed to be compatible with stereo receivers.
No, the Tek Partner remote programs to one TV at a time.
Yes, your old remote control will still function. The Tek Partner remote will not affect the functionality of your old remote.
The Big Button remote is compatible with most TV, DVD, VCR, Cable boxes and Satellite receivers. The compatible brands are listed in our manual. Or, you may contact Tech Support at 877-724-4922 and we are happy to assist you. *Please note that when checking for the compatibility of cable boxes and satellite receivers, the brand is usually located on the front of the box/receiver (such as Motorola, Cisco, etc).
The codes are located in the manual. *Please note that the applicable code for cable boxes and satellite receivers is the brand of box/receiver, not your provider. The brand is usually located on the front of the box/receiver (such as Motorola, Cisco, etc).
If you need assistance in finding codes, please call us at 1-877-724-4922.
Yes, the device you are programming should be turned on.
The applicable codes for cable boxes and satellite receivers will be listed by who manufactured your equipment (such as Motorola, Cisco, etc), not your service provider. The brand is usually located on the front of the box/receiver or on the back of the remote.
1. To enable the Master Power feature, turn ON all your devices.
2. Press and hold the device button for approximately three seconds until the indicator light begins to blink. (*TIP- if you are programming the Master Power feature with a cable box or satellite dish, you should use the CBL/SAT button for programming master power).
3. Press and release the power button twice. Master Power is now enabled.
4. Repeat the process to disable the Master Power feature.
1. Program your remote to the TV and Cable Box/Satellite Receiver.
2. Press and hold the CBL/SAT button until the indicator light begins to blink.
3. Release the CBL/SAT button.
4. Press and hold the CBL/SAT button. At the same time, press and hold the TV button for approximately 2 seconds.
5. Release both the CBL/SAT button and the TV button.
There is no need to wipe out your old codes. Simply proceed with programming, which will override and replace the old codes. However, if you wish to erase all the programming for the old codes for any reason, simply remove the batteries for 15 minutes and the remote will default to factory settings.