|Your cart is currently empty|
Shoulder support takes work comfort to an entirely new level
Sitting or standing, you'll be in the perfect position for more pain-free productivity
ArmSupport Red makes a great productivity tool even better, helping to ensure proper work posture and alleviate muscle strain in your neck, back, arms and wrists while sitting or standing. Created specifically for RollerMouse Red and RollerMouse Red plus, ArmSupport Red aligns the upper body while you type and use your RollerMouse. Able to be clamped to the front edge of desks from 1" to 1-3/4" in thickness, this accessory to the RollerMouse Red is ideal for height-adjustable workstations.
ArmSupport Red provides the ultimate support for maintaining a neutral typing and mousing position in either a standing or sitting position.
Note: Desk, Keyboard, monitor, apples not included
Make sure your RollerMouse Red is unplugged. Remove the short wrist rest if still attached, by using the key that came with your RollerMouse. Insert the key into the slot next to arrow on bottom of RollerMouse Red. Turn in direction of arrow to release the short wrist rest at each end. Separate the units.
Turn your ArmSupport Red upside down on a flat surface. Loosely attach the brackets to the ArmSupport Red by using the thumb screw in the hole in the small arch in the bracket.
Slide your ArmSupport Red with brackets attached onto your desktop. Adjust placement as needed by sliding thumb screws up and down the metal track. Tighten slightly.
Align RollerMouse Red in the space between ArmSupport Red and your keyboard. Tighten the thumb screws until the ArmSupport Red is fully secure. Install keyboard risers and plug your RollerMouse Red in. Your ArmSupport Red is now ready to use.
Please fill out the form below to request a product quote. A representative will respond to you via email or phone as soon as possible.