|Your cart is currently empty|
Simple and convenient to use, this induction loop receiver is designed for use in induction-looped areas by listeners who do not wear T-coil-equipped hearing aids. Compatible with all IEC60118-4 compliant induction loop systems.
Operates up to 200 hours with two AA alkaline batteries
Simple to use -- on/off volume control
Internal tone control
3.5mm stereo jack
Compatible with Williams Sound 2- and 12-bay chargers (CHG 3502 and CHG 3512). Chargers sold separately.
PLR BP1 Architectural and Engineering Specifications
The PLR BP1 is a body pack style Induction loop receiver. It shall operate for up to 200 hrs with two AA Alkaline batteries and be housed in a black plastic enclosure. It shall have battery recharge ability utilizing Williams Sound drop-in chargers.
The PLR BP 1 shall have a 3.5 mm headphone jack, on/off volume control. There shall be a tone control inside the battery compartment. It shall have a green power LED which will blink when the battery is low.
The PLR BP 1 shall be covered under a 5 years parts and labor warranty.
Dimensions: 4.1”H x 2.85”W x 1.38”D (104 mm H x 72 mm W x 35 mm D).
Weight: 4.6 oz (130 g) with batteries, 2.6 oz (73 g) without batteries.
Color/Material: Black ABS/polycarbonate molded plastic case.
Battery Type: (2) AA (1.5VDC) Alkaline or NiMH (rechargeable).
Battery Life: Up to 200 hours with Alkaline batteries.
LED Indicator: Green LED indicates power on, flashes when batteries are low.
Headphone Jack: 3.5mm stereo TRS jack works with mono or stereo headphones.
Volume control: External switched thumb wheel controls power on/off and volume level.
Tone control: Rotary control inside battery compartment (1kHz reference at 400mA/m input with Tone at mid position)
Induction Coil: Maximum reception: receiver oriented vertically
Power Output: 35mW (max) into 33 ohms mono impedance
Frequency Response: 300Hz to 10KHz, -6dB
Products compatible with Proloop Body Pack Induction Loop Receiver:
PLA 215 - Hearing HotSpot Room Loop
PLA 90 - Hearing HotSpot Counter Loop
PLA DCCP - PROLOOP DCC Plus Induction Loop Amplifier
Please fill out the form below to request a product quote. A representative will respond to you via email or phone as soon as possible.