|Your cart is currently empty|
Receiver package includes CHG 518 five-bay charger and three PLR SR1 receivers allowing user to add and charge additional receivers.
Five bay charger allows user to add additional receivers
CHG 518 Architectural and Engineering Specifications
The CHG 518 shall be a 5 unit drop-in battery charger and shall charge a maximum 5 x BAT AP07D NiMH battery packs while they are installed into the Williams Sound WIR RX18 style 3V receivers.
The charger shall be enclosed in metal and plastic measuring 12”L x 6.25”W x 1.5”H (30.48 cm x 15.875 cm x 3.81 cm). The unit shall weigh 1.04 lbs (.47 kg) without power supply, 1.6 lbs (.725 kg) shipping weight.
Each bay on the charger shall have a red LED indicating charging status. The LEDs shall be on continuously during charge and after six hours will turn green indicating battery is fully charged. The charger will monitor the state of the batteries and will recharge them if needed when kept in the charger*.
The charger CHG 518 shall be powered by an external power supply via a DC barrel connector. The CHG 518 shall be supplied with a piggy-back connector enabling up to three chargers to be powered by one power supply. The charger shall be RoHS compliant and be covered by a one-year parts and labor warranty (90 days on cable and power supply).
The charger shall be the Williams Sound, model CHG 518.
Dimensions: 12”L x 6.25”W x 1.5”H (30.48 cm x 15.875 cm x 3.81 cm)
Weight: 1.04 lbs (.47 kg) excluding power supply
Color: Black metal and plastic
Power Supply Input: 120 VAC
Power Supply: 100-240V / 12VDC TFP 043
Unit Capacity: 5 Units
Indicators: Individual Charging Indicators: Red LEDs
Warranty: 1 year (90 day warranty on cables and power supply)
Approvals: WEEE, RoHS
Note: Charging specifications are based on Williams Sound, rechargeable NiMH battery, BAT AP07D
*Due to a component substitution there are two versions of the CHG 518. Serial numbers 0654 to 0853 will NOT monitor the battery state and will charge on a six hour timer. Serial numbers before and after this sequence will monitor the battery state.
Frequency Response: 70 - 5400 Hz
Distortion Factor: < 1 %
Signal-to-Noise Ratio: Typ. 60 dB
Battery type: BAT AP11A NiMH Battery Pack
*Battery Charging Time: Approx. 6 hours
Operating Time: Approx. 6 hours
Maximum SPL: Approx. 120 dBA
Auto Power: Turn off / on switch built into arms
Weight: 1.6 oz. (47 g)
Warranty: 2 years
Approvals: CE, RoHS
Products compatible with Induction Loop Receiver Package: PLA DCCP - PROLOOP DCC Plus Induction Loop Amplifier
Special Order: This is not a stock item and is ordered specifically. Unfortunately, no returns, no cancellation, so please call our trained staff with any questions you may have prior to ordering to ensure you make a well informed, educated purchase.
Please fill out the form below to request a product quote. A representative will respond to you via email or phone as soon as possible.