|Your cart is currently empty|
|Footrings – for stool cylinders only:|
|NeXtep – for stool cylinders only:|
|Thoracic Support Not available on Mesh back:||ADD (Add $105.60)|
|Cleanroom to Class 100 :||ADD (Add $158.40)|
|Coccyx Cutout Cloud 9, Revive, Top Shelf :||ADD (Add $283.80)|
|No Inflatable Lumbar :||YES (Subtract $66.00)|
|ESD* :||ADD (Add $382.80)|
|Fring Footrest Only available on (B0) base:||ADD (Add $66.00)|
|N·dulgent Memory Foam:||ADD (Add $165.00)|
|ThermaGel Memory Foam:||ADD (Add $198.00)|
Up to 15 active adjustments
Mesh back, mid back or high back
Passive weight dispersion design
Generous foam for optimal comfort
Inflatable lumbar on 5 & 8 back
Optional headrest available on 1 & 8 back
5-way 360° Arms
26" Black Base
XSM - Multi-function
1. Back Height - Slowly lift the back until you have the appropriate lumbar support. If the back is too high, lift the back all the way up and then lower to the first position.
2. Inflatable Lumbar - Locate the small lever protruding at bottom right side of backrest. Lift the lever slowly and repeatedly to inflate lumbar pillow. Depress and hold to deflate.
3. Seat Height - Lift the lever and lift your weight to raise the seat to the desired position. To lower the seat, lift the lever while remaining seated.
4. Seat Angle - Push down to adjust seat angle. Lift to lock into place. For rocking, push the lever all the way down.
5. Back Angle - Lift lever and recline to your desired position. Release lever to lock into place.
6. Seat Tilt Tension - From in front of the chair turn the knob to the right to increase tension or turn the knob to the left to decrease tension.
7. Forward Tilt-stop - To increase forward tilt, recline seat angle slightly and then rotate the control forward. To reduce, rotate the control backward.
8. Seat Slider (Depth) - With your back against the backrest, lift the lever to disengage the lock and slide the seat to your desired position. Release the lever to lock the seat in place.
9. Arm Width - Push lever down to release the arm and slide the arm to the proper position. Lift lever to lock arm into place.
10. Arm Height - Press button to adjust height until your arms are properly supported.
11. Pad Rotation - Squeeze the lever under the front of the arm pad to rotate in a full 360° circle. Release the lever to lock into desired position.
12. Arm Pad Position - Squeeze the button on the edge of the pad to release and slide in any direction.
#1 Mesh Back
#5 Mid Back
#8 High Back
Petite Seat, Minimal Contour
#0 5-way 360°
#3 360° w/Oversized Urethane
#5 No Arms
#6 360° w/Oversized Black Vinyl
#7 360° w/Oversized Fabric/Leather
#P 360° Swivel
|Chair (H x W x D)||39.75 x 26 x 26||35.5 x 26 x 26||40.25 x 26 x 26|
|Chair Weight||52.5 lbs.||52 lbs.||54.5 lbs.|
|Seat Height||15.75 – 20.75||15.75 – 20.75||15.75 – 20.75|
|Seat Depth||15.5 – 18||15.5 – 18||15.5 – 18|
|Seat Angle||F4° – R11°||F4° – R11°||F6° – R12°|
|Back Height:||23||18 – 22||23 – 27|
|Back Angle||95° – 115°||105° – 121°||95° – 111°|
|Arm Height||7 – 11||7 – 11||7 – 11|
|Arm Width||13.5 – 18.25||13.5 – 18.25||13.5 – 18.25|
|COM Yardage||1 yd||2 yd||2 yd|
|Shipping Box (L x W x H)||28 x 26 x 24||28 x 26 x 24||28 x 26 x 24|
|Shipping Weight||62.5 lbs||62 lbs||64.5 lbs|
#A Thoracic Support Not available on (1) back
#CR Cleanroom to Class 100
#CX Coccyx Cutout Cloud 9, Revive, Top Shelf & M Plus
#D1 No Inflatable Lumbar
#F Fring Footrest Only available on (B0) base
#N N·dulgent Memory Foam
#N2 ThermaGel Memory Foam
#HE Height Adjustable Black vinyl – (1) back only
#H4 Dual Pivot Matching upholstery – (8) back only
#H5 Dual Pivot Black faux leather – (1) back only
#L1 3" Cylinder
#L13 7" Dual Stage
#L14 10" Dual Stage
#C1 Hard Floor
#C3 Occupied Braking
#C4 Unoccupied Braking
#C8 Chrome Carpet
#C9 Chrome Hard Floor
#B6 26" Polished Aluminum Recommended with (L1)
#B8 27" Brushed Aluminum Recommended with (L1)
#B12 28" Black $110
#L4 8" Cylinder
#L5 10" Cylinder
#L7 7" Cylinder
Footrings – for stool cylinders only
#R1 18" Black Plastic
#R2 20" Chrome
NeXtep – for stool cylinders only
#R8 8" w/Casters
#R10 10" w/Casters
#R18 8"/10" w/Casters
#RW8 Wide 8" w/Casters
#RW10 Wide 10" w/Casters
Please fill out the form below to request a product quote. A representative will respond to you via email or phone as soon as possible.