MicroDesk by the GoodUse Company

• Document Holder + Writing Platform
  
• The benefits of using The Good Use Microdesk are that it:
  
• Stops aches and pains caused from twisting when writing to the side of the keyboard.
  
• Centres paper work in line above the rear of the keyboard.
  
• Makes a stable, adjustable work surface – excellent for writing and reading with computer work.
  
• Allows access to the keyboard at all times.
  
• Comes with a non slip ruler / guideline with all models.
  
• Comes with paper ledges in two height sizes.
  

Regular Microdesk

• For standard single-surface desks.
  
• Surface 560 mm wide x 310 mm deep (22"W x 12"D).
  
• Front height adjusts from 75 mm – 95 mm ( 3” – 3¾").
  
• Rear height adjusts from 150 mm – 190 mm ( 6” – 7 ½").
  
• Weight - 1.52 Kg (3 lbs 6 oz) in carton
  
• Paper ledge supplied in two heights: 20mm (3/4") and 8mm (1/4")
  

Step Microdesk

• The Regular Microdesk includes the accessories to make the Step Microdesk.
• For use on keyboard tray or split level desks.
  
• Surface 560 mm wide x 310 mm deep (22"W x 12"D).
  
• Front height adjusts from 80 mm - 125 mm (3" - 5").
  
• Rear height adjusts from 80 mm - 125 mm (3" - 5").
  
• Weight 1.46kgs (3lbs 4oz) in carton.
  
• Paper ledge supplied in two heights: 20mm (3/4") and 8mm (1/4")
  
• Also useful on a single surface desk where monitor screen is placed low for shorter people or for those with graduated lens reading glasses.
  

Compact Microdesk

• For use with a laptop on a docking station OR a confined work area. Fits with all styles of keyboard.
  
• Surface 430 mm wide x 310 mm deep (17" W X 12"D).
  
• Front height adjusts from 75 mm – 95 mm ( 3” – 3 ¾").
  
• Rear height adjusts from 150 mm – 190 mm ( 6” – 7 ½").
  
• Weight - 1.38 kg (3lbs) in carton
  
• Paper ledge supplied in two heights: 20mm (3/4") and 8mm (1/4")
  

How to Use

• Assemble your Microdesk using the instructions in the box:
  
• Clip the sides onto the platform bottom.
  
• Screw the feet into the side sections making sure the feet furthest away are longer than the feet at the front.
  
• Put the front lip / paper ledge in place – you have a choice of either a high lip or a low lip.
  
• Adjust feet height to suit either a flat surface or a keyboard tray.
  
• When writing on the Microdesk it is important to:
  
• Keep your elbows within range of your body, no reaching out.
  
• Write with a bent elbow not a straight arm so you can access the function and number keys of the keyboard beneath the front edge of the Microdesk.
  
• Rest your forearm comfortably on the platform on top when using the Microdesk for writing.
  
• Keep your chair close to the desk and your mouse close to the keyboard.
  
• Keep your back and feet well supported, and your shoulders and neck relaxed for work.
  
• The Microdesk suits left and right-handed writers.
• There is a removable lip at the base to stop your papers from sliding off – don't lean your wrist on the high lip while writing, keep to the side where there is a flat area OR change to the low lip profile.
• The ruler / line guide is included with all desk models.
  
• Note: Do not slump or stoop as you work. This causes tension in your back, neck and shoulder areas. The Gooduse Microdesk helps relieve this tension through positioning your body well while you work.